how yo remove gorilla tape adhesive from car

by:CROWN     2024-04-10


Have you ever found yourself in a situation where you've had to use Gorilla Tape on your car only to discover that removing its adhesive is quite a daunting task? We understand the frustration! Gorilla Tape adhesive can be known for its incredible strength and durability, but removing it from surfaces like cars requires some patience and the right techniques. In this article, we will explore various methods to effectively remove Gorilla Tape adhesive from your car without causing any damage. So, let's delve into the world of adhesive removal and restore your car's pristine appearance!

Spatula and Adhesive Remover:

One of the simplest and most commonly used methods to remove Gorilla Tape adhesive from your car is by using a spatula and an adhesive remover. Start by gently peeling off as much tape as possible without damaging the car's surface. Once you've removed as much tape as you can, apply a few drops of adhesive remover onto the remaining adhesive residue. Let it sit for a few minutes to break down the adhesive, making it easier to remove. Now, take your spatula and gently scrape off the loosened adhesive. Be careful not to apply excessive force as it may scratch your car's surface. Repeat the process if necessary until the adhesive residue is completely removed.

Vinegar and Warm Water:

If you prefer a more natural and cost-effective solution, using vinegar and warm water can be an excellent option. Mix equal parts of vinegar and warm water in a spray bottle and shake well to ensure they are properly combined. Spray the solution onto the Gorilla Tape adhesive and let it sit for a few minutes to allow the vinegar's acidity to break down the adhesive bonds. Then, using a clean cloth or sponge, gently rub the area in a circular motion. The adhesive should loosen, allowing you to remove it with ease. If necessary, repeat the process until all the adhesive is gone.

Heat and Rubbing Alcohol:

Sometimes, applying heat can make the adhesive removal process much easier. You can use a hairdryer or a heat gun to warm up the adhesive without overheating the car's surface. Set the hairdryer or heat gun to a low or medium setting and hold it a few inches away from the Gorilla Tape adhesive. Move the heat source around the adhesive in a sweeping motion, ensuring that it doesn't remain focused on one spot for too long. As the adhesive heats up, use a cloth dampened with rubbing alcohol to wipe away the softened residue. The combination of heat and rubbing alcohol will break down the adhesive bond, making it simple to remove.

WD-40 and Plastic Scraper:

For stubborn Gorilla Tape adhesive that refuses to budge, WD-40 can become your trusted ally. WD-40 is a multi-purpose lubricant that can work wonders in removing tough adhesives. Begin by spraying a generous amount of WD-40 directly onto the adhesive and let it sit for a few minutes. The WD-40 will penetrate the adhesive, making it easier to remove. Then, take a plastic scraper and gently scrape off the adhesive, being cautious not to scratch the car's surface. If needed, apply more WD-40 and repeat the scraping process until the adhesive is completely gone. Remember to clean the area with mild soap and water after removal to eliminate any residue.

Commercial Adhesive Removers:

If the above methods do not completely remove the Gorilla Tape adhesive from your car, you can consider using a commercial adhesive remover. These products are specifically designed to dissolve and eliminate tough adhesive residues without damaging the surface. Before using any commercial adhesive remover, read and follow the instructions carefully. Apply the adhesive remover to the affected area, allowing it to penetrate the adhesive for the recommended duration. Then, using a clean cloth or sponge, gently wipe away the adhesive residue. Repeat the process if needed until all traces of Gorilla Tape adhesive are gone. Afterward, wash the area with mild soap and warm water to ensure the car's surface is free from any residue.


Removing Gorilla Tape adhesive from your car can be a challenging task, especially if you don't have the right techniques or products at hand. However, with the methods mentioned in this article, it is now possible to remove the adhesive residue effectively without causing any damage. Whether you opt for the spatula and adhesive remover, vinegar and warm water, heat and rubbing alcohol, WD-40 and a plastic scraper, or a commercial adhesive remover, always exercise caution and patience during the process. Remember to test any method or product in a inconspicuous area first to ensure it doesn't harm your car's finish. Now, armed with the knowledge and techniques provided, you can confidently tackle any Gorilla Tape adhesive mishap on your car and restore it to its former glory. Happy adhesive removal!

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...