Economic downturn Process of Colour Contact lenses

by:CROWN     2020-06-03
The most significant corners of the lens are classified as the anterior central curve (ACC) and the posterior central curve (CPC). The CAC refers to your general curve of the lens side facing. The outer contour that produces the correct refractive in order to meet the patient's way they. The CPC is the inside concave zoom lens. This is consistent with the measurements of the patient's little brown eyes. Usually, these two curves are formed first, and the lens is considered semi-finished. The lens is finished when the intermediate and peripheral curves are formed and sexy. Lets now see how lenses how various colored lenses is made:- Molding Process: - Molding the lens can be done in several methods. The lenses first developed in Prague spin-cast. Three different liquid emptied into open molds rotation. The outer curvature of the lens is formed by the mold, and the curvature inside the interior are formed according to the speed of rotation for this mold. The centrifugal force rotates the mold created polymerization with the fluid so that the molecular chains attached towards the form of plastic requires hydrophilic. An additionally reliable mass production of colour disposable lenses is process of injection molding. In injection molding, molten plastic is injected into the mold pressurized. Then the lens is removed from the mold and cooled. Posting is to absolve on a lathe maybe. It is also possible to supply lenses completely through molding, there, you need not cut in and around. This is a recent development, made possible thanks to highly automated, computer controlled production mod. Lathe process:- The initial formation belonging to the lens can also be done by cutting on the lathe. Initially a blank is prepared. The target is a circle only a little bigger next the dimension of this finished lens. This can be cut originating from a plastic rod, or the seal of having a plastic layer. Then, blank is put in a steel button with a slump of molten grow. The button is then switched on a lathe, which actually starts to rotate at high improve. A cutting tool, which is really a diamond or simply laser, it cuts concave in the blank for making the Cost-per-click. Indicators on the lathe to measure the depth of cuts to help the operator of the lens. The button holding the target is then moved to a polishing appliance. The polishing machine has an empty against a Lapper, a spinning disk covered through abrasive product. The shapes of the Lapp coincide a problem CPC lente. The polishing machine the blank rotates in one direction and Lapper on the other. It also moves the blank space in small figure of eight movements. The abrasion polishes the top of the lens. The lens is hanging on a polished steel shaft called an arbor. No more the roundabout has been ground to match the CPC so that the lens will adjust the shaft. The garden has been installed on a lathe, along with the operator makes cuts convex lens to form the curve of other great, the CAC. This side belonging to the lens is polished, and Lapper recently been modified to suit the convex CAC. When the second side of the lens is polished, the lens is regarded semi-finished products Finishing Process:- The lens requires several corners down before the lens fits exactly as eye for this patient. Ultimate curves would be anterior and posterior peripheral curves and curves both before and after intermediate, which govern of one's pool of the lens closest and next closest to your edge. The lens is mounted on an arbor again by suction or double-sided tape. Your garden has been installed using a lathe or milling machine. These cut surfaces can be ground with sandpaper or cut by using a razor. The diameter among the lens are also arranged at the present time.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...