Double sided tape / Adhesive tape
- High-strength Tissue Tape
- Electronic Die-cutting Adhesive Tape
- Ultra-thin High Adhesion Adhesive Tape
- PET Adhesive Tape
- Non Carrier Transfer Tape
- PE/EVA Foam Adhesive Tape PE/EVA
- Flame Retardant Tissue Tape
- Economical Solvent Acrylic Adhesive Tape
- Economical Water-based Acrylic Adhesive Tape
- Economical Hot-melt Acrylic Adhesive Tape
How to remove the sticky tape residue?
In fact, the following two methods are found to be good: the alcohol removal method. Dip a soft cloth or similar into a sufficient amount of 95% alcohol, and then gently wipe the label. The sticker easily becomes soft and peels off. At the same time, alcohol usually does not cause any damage to plastic parts or car paint. But sometimes it is found that alcohol is not very effective for certain stickers. This is to wipe the sticker with a soft cloth dipped in a small amount of gasoline. At this time, it should be noted that gasoline has a 'dissolving' effect on certain plastics or coatings. Therefore, please use it carefully: first lightly observe the unimportant places, if there is no problem, please use it. But please be careful not to use too much gasoline and keep the time as short as possible! I have tried to wipe the surface of the car body with gasoline for a short time, and it has no obvious effect on the paint film on the car body surface. In this way, the sticker can be easily removed...
Is there a way to remove the adhesive tape stains on the door?
Use super adhesive paper to paste some decorations on the door, and then remove them, you will find a lot of glue marks on the door. You can use gasoline or kerosene to wipe the tape. You can also buy No. 1200 water sandpaper to spray water to wipe off the stains, and then buy a can of varnish, dilute it with banana oil, and brush it with a row of brushes once to restore the brightness. Do not use nail polish to wipe, although it can remove glue stains, unfortunately, the door will become white stains.
Tape: First scrape off the tape with a knife, then wipe with petroleum solvent; scrape off the tape with frosted glass, then wipe with turpentine.
'Self-adhesive trademark removal method'
There are always some labels on newly purchased stainless steel basins or glassware. After removing the label, leave the label on the label, it is difficult to remove the trace. Wiping with a damp cloth or scraping with a knife usually leaves marks. After a lot of practice, I have summarized some tips that can be shared with you.
For the adhesion marks on the surface of hard objects, we can use a non-greasy nail polish remover on the surface of the object, and then gently wipe with a soft cloth; these marks can also be removed with industrial alcohol or gasoline. If these stickers stick to the skin, you can also use lemon juice to remove them.
In addition, hand cream can also achieve the effect of removing mucous membranes. The hand cream contains a lot of water (usually more than 70%), and the water contains a certain amount of surfactants. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the adhesive and the surface of the object to achieve the purpose of removal. You will also find that some similar products, such as creams, facial cleansers, and cleansers, have the same effect.
For the more stubborn stickers on the carpet, the method is to carefully trim off the stickers on the top of the carpet fluff.