◔ This product serie is a general purpose double-sided adhesive tape with a tissue/PET/OPP carrier, and solvent base acrylic adhesive is evenly coated on both sides, and then a release paper is laminated on it. It has a variety of thickness option from 0.06mm to 0.2mm and is widely used in various civilian products, processing materials and consumables, etc. Its special applications include computerized embroidery positioning, leather positioning and foam lamination.
◔ The product has wide application, and is highly versatile
◔The product performance is stable and has wide range of thickness options
◔ The product is flexible and strong adhesion
Computerized embroidery positoining
Suggested Model: DS10B3/DS11D
The product can be used in computerized embroidery, and has good adhesion and fixation for the different fabrics; additionally, it will not cause pollution and damage to the fabric, especially suitable for expensive and demanding fabrics.
Cushioning and shock absorption
Suggested Model: DS10B6/DS10WW/DS10CC
From daily uses to industrial applications, this series of products has basically covered adhesion and fixation of cushioning and shock absorbing foam materials required by all industries. Whether it is a flat, curved surface, or 90 degrees angle, it can provide different solutions.
Cosmetics Bottle Cap
Suggested Model: DS10G/DS13B (No optical brightener)
The product does not contain optical brightener, and is applicable to bond the general daily articles, cosmetics and health care products.
Leather positoining
Suggested Model: DS10B6#
The product is mainly researched and developed for leather positioning, high adhesion. It is usually used for temporary positioning of a variety of leather wallets, backpacks and so on before sewing.
Seal Gasket Stamping
Suggested Model: DS10B1
The product has relative harder adhesive. During die cutting, the adhesive will not be squeezed out. It can be used for general labels, nameplates, gasket, paper splicing, etc.
| Model | Tape thickness(mic) | Color | Initial Tack(mm) | Peeling Force(N/24mm) | Holding Power(hour) | Remarks | ||||||
| DS10G | 70-160 | Translucent | <=150 | >=9-20 | >=2 | General purpose (suitable for ordinary bonding) | ||||||
| DS10B | 70-160 | Translucent | <=120 | >=9-21 | >=2 | |||||||
| DS10G1 | 70-150 | Translucent | <=150 | >=7-13 | >=10 | Slightly hard, dry adhesive, strong adhesion, suitable for die-cutting, stamping and bonding of ordinary nameplate | ||||||
| DS10B1 | 70-150 | Translucent | <=120 | >=7-13 | >=10 | |||||||
| DS10B3 | 90-100 | Translucent | <=120 | Inside>=16-18 Outside>=10 | Inside>=2 Outside>=0.5 | Slightly soft, suitable for computerized embroidery bonding. One side is affixed to the baseboard, the other side is affixed to the embroidery cloth | ||||||
| DS10G6 | 70-140 | Translucent | <=150 | >=13-23 | >=0.5 | Slightly soft, wet adhesive, suitable for planar adhesion of ordinary foam materials | ||||||
| DS10B6 | 80-140 | Translucent | <=120 | >=15-23 | >=0.5 | |||||||
| DS11D | 90 | Translucent | <=70 | Inside>=8 Outside>=17 | Inside>=0.5 Outside>=2 | Strong adhesion, suitable for computerized embroidery positioning and foam lamination. One side is affixed to the machine baseboard, the other is affixed to the embroidery cloth | ||||||
| DS10A1 | 70-120 | Translucent | <=120 | >=9-14 | >=20 | The adhesion is better than DS10B1, suitable for die-cutting, stamping and ordinary nameplate adhesion | ||||||
| DS10CC | 70-150 | Translucent | <=150 | >=10-13 | >=4 | Strong adhesion and wet adhesive, suitable for bonding general foam materials with curved surfaces. | ||||||
| DS10WW | 80-150 | Translucent | <=150 | >=14-21 | >=1 | |||||||
| DS15B | 90-140 | Black | <=150 | >=10-13 | >=2 | General performance, suitable for the bonding of speaker mesh stamping, black color tape provides good light shielding effect. | ||||||
| DS31 | 80-150 | Translucent | <=100 | >=8-15 | >=3 | PET carrier, general performance, good transparency, suitable for fixing general signs | ||||||
| DS32 | 80-150 | Translucent | <=100 | >=8-15 | >=3 | OPP carrier, general performance, good transparency, suitable for fixing general signs | ||||||
| KT19 | 145+/-5 | Brown | <=80 | >=12 | >=24 | Kraft adhesive tape, special model, heat resistance up to 100℃, suitable for paper processing. | ||||||
Disclaimer: The product technical data are for reference only. Actual performance may differ depending on factors beyond our expectation and control. | ||||||||||||
